A home battery is safe when used properly: the fire risk of a home battery is small, but not zero. A battery management system, certification to a recognized safety standard and a sensible spot in your home keep the risk low.
Below, you'll read how big the chance of a fire is, how a battery fire starts and what you can do yourself to keep that chance small.
How big is the chance of a fire from a home battery?
The chance of a fire from a home battery is small: with a home battery in your home, the chance of a house fire rises by about 10 percent. That applies to a home battery with a working safety system, as the Netherlands Institute for Public Safety (NIPV) states based on research by DNV. The institute itself calls that percentage an indication, since there is still little incident data.
The difference between a battery with and without monitoring is huge: according to the same figures, a lithium-ion battery with a good battery management system has roughly a 150 times lower chance of failure. That failure chance does stay higher than the chance of a fire from a dishwasher, washing machine or refrigerator.
In the Netherlands, incidents involving home batteries are still rare, but the number of batteries is growing fast, and both the NIPV and the fire brigade expect the number of incidents to grow along with it.
What causes a fire in a home battery?
A fire in a home battery is caused by electrical, mechanical or thermal damage to a battery cell. The NIPV gives examples such as overcharging, deep discharging or a short circuit (electrical), a punctured or dented battery (mechanical), and overheating from a heat source or a nearby fire (thermal).
Mechanical damage is less theoretical than it sounds. In the Haaglanden region, a home battery caught fire after someone hit the battery while drilling into a wall. On top of that, installation and maintenance mistakes play a role, as do aging and manufacturing defects. A wrong connection makes even a good battery risky.
What happens during thermal runaway in a home battery?
During thermal runaway in a home battery, a chain reaction starts in a battery cell: the cell heats up, that heat intensifies the chemical reaction, and the temperature keeps rising. In the process, flammable and toxic gases are released, such as hydrogen, carbon monoxide and hydrogen fluoride. The heat can also push neighboring cells into thermal runaway, causing the incident to spread through the entire battery pack.
A battery fire therefore unfolds differently from an ordinary house fire. According to the NIPV, the maximum fire output is comparable to that of a burning sofa, but it is reached faster, and a fire-brigade specialist warns that an entire floor can be filled with smoke within a minute. As long as there's energy in the cells, the battery can reignite after being extinguished; that's why the fire brigade often has to dismantle a home battery and continue cooling it outside.
Which home battery is fire-safe?
A home battery is fire-safe if it has a battery management system that intervenes, is qualified to the IEC-EN 62619 standard, and uses a stable cell chemistry. These three properties determine how small the chance of an incident is and how it unfolds if things do go wrong. So when comparing models, look beyond capacity and price.
What role does the BMS play in a fire-safe home battery?
In a fire-safe home battery, the BMS acts as the guardian: it continuously monitors the voltage, current, charge level and temperature of the cells. If the BMS detects an anomaly, the system stops charging or discharging, or shuts the battery down completely.
Keep the software up to date via the app as well; the fire brigade recommends this too. You can read more about the setup of the entire system in the article on how a home battery works.
Why does the IEC-EN 62619 standard matter for a home battery?
The IEC-EN 62619 standard matters for a home battery because it sets safety requirements for lithium batteries used for stationary storage, among other things. According to the fire brigade, a battery that meets this standard is protected against a fire spreading from one cell to the other cells.
Check the datasheet to see if the standard is mentioned. A CE marking tells you little about this, since it only proves the product's basic conformity.
Is an LFP home battery less of a fire hazard?
Yes, an LFP home battery poses less of a fire risk than an NMC battery, because lithium iron phosphate is more thermally stable and less likely to go into thermal runaway. The Zendure SolarFlow 2400 AC+, for example, uses LFP cells.
LFP isn't entirely non-flammable: according to the same fire-safety specialist, battery types that burn less intensely often produce more smoke. That's why the smoke measures from the fire brigade's advice below are still needed, even with LFP.
Is a plug-in home battery more of a fire hazard?
No, a plug-in home battery isn't inherently more of a fire hazard than a fixed home battery, but the risk more often lies in how it's used. Brandweer Nederland is concerned about plug-in batteries because no installer is involved during installation. With a fixed battery, a professional assesses the circuit and the location; with a plug-in battery, you do that yourself.
The fire brigade is mainly worried about overloaded circuits in the meter cupboard. That's why manufacturers limit a plug-in battery to 800 watts as standard via a regular socket, and Zendure requires that an electrician install a separate circuit if you want more power or place multiple batteries. So when choosing a plug-in home battery, also look at the manufacturer's connection requirements and not just at the capacity.
What does the fire brigade recommend for a safe home battery?
For a safe home battery, the fire brigade recommends a spot outside the escape route, a connection that doesn't overload the circuit, and regular checks. The advice applies to plug-in batteries and fixed systems, the difference being that for a fixed system an installer handles the connection. These are the most important points:
- Spot: not in an escape route or under the stairs, but in a dry, well-ventilated space that's accessible to the fire brigade.
- Surface: on or against a non-combustible surface, with free space around it and not near the heating or in direct sunlight.
- Smoke detector: a working smoke detector, optionally supplemented with a CO detector, in the room where the battery sits or hangs.
- Socket: a plug-in battery straight into an earthed socket, without an extension cord or power strip.
- Circuit: preferably a separate circuit and never more than one home battery per circuit.
- Meter cupboard: a marking indicating that a home battery is connected, along with the supplier's emergency number.
- Check: inspect the plug, cables and housing twice a year, for example when the clocks change.
- Insurance: notify your insurer, because the terms of a home battery insurance vary from policy to policy.
Which space in your home is most suitable depends on the layout; you can read more about this in the article on where to place a home battery. If you'd rather not connect an Anker SOLIX Solarbank with a loose plug, you'll find a fixed AC connection and a lockable Wieland socket among the accessories for your home battery.
What signs point to an unsafe home battery?
Signs that point to an unsafe home battery are a chemical or burning smell, discoloration of the housing, and a battery that feels noticeably warm. Error messages in the app that keep coming back, or a battery that keeps switching itself off, can also point to a problem with the temperature or cell balance.
Also watch out for damage you can't see right away. After a knock, a fall, a leak or drilling work nearby, a battery can be damaged internally. In that case, contact the supplier and don't try to open the battery yourself.
What do you do if your home battery catches fire?
If your home battery catches fire, leave the room immediately, close the door behind you if it's safe to do so, and call 112. Tell the emergency dispatcher that a home battery is involved in the fire, so the fire brigade knows what to expect. Do the same if there's smoke without visible flames.
After that, don't go back to switch off the battery. Switching it off at the meter cabinet is no guarantee that a home battery is de-energized, so the risk of an electric shock may remain. Only contact the supplier or installer once the fire brigade has declared the situation safe.
Can you put out a home battery with a fire extinguisher?
No, you can't effectively extinguish a home battery with a fire extinguisher, and we advise against putting it out yourself. At most, an extinguisher can limit the flames on the outside, while the reaction in the sealed cells simply continues. You'd also be standing right next to the source of the smoke.
In any case, never put out a fire with water yourself. With a burning lithium battery, water can cause a violent reaction, and according to the Dutch Burns Foundation, using water to extinguish battery fires yourself leads to life-threatening situations. Leave the firefighting to the fire brigade, who are equipped for it.
Getting started safely with a home battery from TechPunt
If you're looking to buy a home battery, TechPunt is happy to think along with you about a model that fits your home and meter cabinet. We carry home batteries from Zendure and Anker SOLIX and ship them from our own warehouse in Barneveld. Not sure about the connection or capacity? Ask our customer service your question by phone, email or WhatsApp.


