If you have solar panels, most energy suppliers charge you feed-in costs on the electricity you deliver to the grid. Usually it's a separate item on your energy bill, apart from what you pay for your own consumption.
As of January 1, 2027, the way suppliers calculate these costs will change, and with it what you can do about them. Below you'll read what feed-in costs are exactly, how they're calculated, what will change in 2027 and what steps you can take to lower the amount.
What are feed-in costs?
Feed-in costs are costs your energy supplier charges on the electricity you feed back to the grid with your solar panels. You pay them on the kilowatt-hours you feed back, so on the part of your generation that you don't use yourself at that moment. The more you feed back, the higher the amount, which makes storing your solar power in a home battery one of the few levers you can pull yourself.
These costs are separate from the rate you pay for the electricity you use, and also separate from the compensation you receive for power you feed back. In your contract and on your annual statement you'll usually find them under rates and costs. The amount varies a lot by supplier and by contract type, and the final amount is only determined on the annual or final statement, based on your actual feed-in.
Why do energy suppliers charge feed-in costs?
Energy suppliers have to estimate in advance how much electricity their customers will use and feed back every quarter hour. Solar power is hard to predict, because it depends on the weather. If the estimate is off, the grid becomes unbalanced and the supplier pays for it.
On top of that, on sunny afternoons many households feed back power at the same time, which drives the electricity price down or even negative, forcing the supplier to sell that power at a loss.
In the past, these extra costs were spread across all customers. For a number of years now, suppliers have placed them with the group that causes them, namely households with solar panels. The regulator ACM investigated whether this is allowed and concluded that it is permitted, as long as the costs are reasonable and the supplier doesn't pass on more than it actually incurs.
How are feed-in costs calculated?
Energy suppliers calculate feed-in costs in three ways: as an amount per kilowatt-hour fed back, as a fixed amount per tier, or built into your fixed delivery charges. Which method applies to you is stated in your contract. The differences between these methods determine how much influence you have on the final amount.
An amount per kWh fed back
With this method you pay a fixed rate for every kilowatt-hour you feed back. If you feed back half as much, you also pay half as much. It's the most predictable form, and from 2027 it will become the standard with nearly all suppliers. For households that feed back little, this method works out more favorably than a tiered scale, because you never end up in a higher category due to a single sunny month.
A fixed amount per tier
With a tiered scale, your supplier places you in a category based on the amount of electricity you're expected to feed back per year. Within such a tier you pay a fixed amount per day or per month, regardless of whether you're at the bottom or the top of that tier. Some suppliers use dozens of tiers. If you feed back just a little more than estimated, you move up a tier and your costs rise all at once.
Hidden in your fixed delivery costs
Not every supplier puts feed-in costs as a separate line on the bill. Some work them into other items, so you'll only recognize them if you know what to look for. These are the names you'll come across in practice:
- Fixed feed-in costs: the most commonly used term, usually linked to a tiered scale.
- Feed-in contribution: the same costs, just named differently on the invoice.
- Sales fee: an amount that's deducted from your feed-in compensation.
- Feed-in surcharge or purchasing costs: a surcharge per kilowatt-hour, often with dynamic contracts.
- Higher fixed charges: a higher monthly amount for customers with solar panels, without a separate item appearing.
If there's no line with feed-in costs on your statement, that doesn't automatically mean you're not paying them. Compare your monthly amount with that of a similar contract without solar panels, and you'll usually see the difference reflected in the fixed charges.
Feed-in costs or feed-in compensation: what's the difference?
Feed-in costs are what you pay, a feed-in compensation is what you receive. The compensation is the amount per kilowatt-hour that your supplier pays you for the electricity you feed back; the costs are what that same supplier charges you for it. Both items are separate from each other and can vary considerably.
So always look at what you're left with net. If the feed-in costs are higher than the compensation, you actually pay money for every kilowatt-hour you feed back. A high compensation in the advertising means little as long as you don't know which costs come with it.
What changes on 1 January 2027?
On 1 January 2027, nearly every supplier switches from tiered scales to an amount per kilowatt-hour fed back. The rates currently known for 2027 mostly range between four and seven cents per kilowatt-hour, with outliers above that. That's a good deal lower than today's amounts, which run up to nearly nineteen cents per kilowatt-hour.
There's a reason those costs are dropping: part of them was tied to the net metering scheme, which expires on that same date. They don't disappear, though.
At the same time, you'll now receive a payment for everything you feed back, which until 1 January 2030 must legally be at least half of the bare delivery rate, that is, the electricity price without energy tax and VAT. On balance, every kilowatt-hour fed back becomes worth less than it is now under net metering.
How much do you pay in feed-in costs per year?
Your feed-in costs are the number of kilowatt-hours fed back times your supplier's rate. A household with around ten solar panels feeds back roughly 2,500 kilowatt-hours per year. If you calculate with a rate of five and a half cents, you end up at about 140 euros per year in feed-in costs.
The interesting part is on the other side of that equation. If you use half of what you now feed back yourself, that line item is halved too, down to around 70 euros, and on top of that comes the electricity you no longer have to buy from the grid in the evening.
Once costs run per kilowatt-hour, the number of kilowatt-hours fed back has the biggest impact on what you pay. So every measure below comes down to exactly that number.
Lowering feed-in costs in four steps
You lower your feed-in costs by feeding back less, and you do that in four steps ranging from easy to drastic. Start at the top, because the first step costs you nothing and sometimes delivers the most.
Check your contract first
Look up which rate you pay and whether your supplier works with a tiered scale or with an amount per kilowatt-hour. With dynamic contracts it works differently: there's usually no separate line item for feed-in costs, although some providers add a surcharge per kilowatt-hour. Once you know what you pay, you also know whether switching is worthwhile and what the other three steps actually save you.
Shift your usage to the afternoon
Every kilowatt-hour you use at the moment your panels generate it is one you don't feed back. These appliances are the easiest to shift:
- Washing machine and dishwasher: run them between eleven and four o'clock instead of in the evening.
- Electric car: charge it at home during the day instead of at night.
- Boiler or heat pump water heater: let it heat up during the sunny hours.
- Dryer and oven: schedule your heaviest appliances for a sunny afternoon.
If you're out of the house during the day, you'll quickly run into the limits of this step. Timers and a smart plug get a bit more out of it, but the peak of your generation still falls at a time when no one is home.
Store your solar power instead of feeding it back
A home battery stores your surplus during the day and releases it back to your household in the evening. This lowers the number of kilowatt-hours you pay feed-in costs on, and it means you buy less electricity at the full rate in the evening. Let's be honest: storage doesn't make the feed-in costs disappear, because whatever you still feed back simply keeps counting. It reduces the basis on which you pay them.
How this works in practice, from charging and discharging to control via your meter cupboard, is explained in our article on how a home battery stores your own solar power. If the panels are already on your roof, take a look at a home battery for an existing solar installation, since you can connect it without replacing your current inverter.
Measure what you actually feed back
Without insight into what you feed back, you're working with assumptions, and your supplier does exactly the same when setting up your contract. Your smart meter tracks consumption and feed-in separately, and through the P1 port, the connection on your smart meter where you plug in a read-out device, you can read out those figures live.
With a smart meter that reads out what you feed back, you can see at which moments your surplus arises. Compare that after a year with your annual statement and you'll know whether your supplier's estimate was correct.
Feed less back to the grid with TechPunt
If you really want to reduce the number of kilowatt-hours you feed back to the grid, it starts with storage and insight. At TechPunt you'll find home batteries, smart meters and accessories for a wide range of installations, from a complete set for your roof to a compact solution for just a few panels.
Not sure which system fits your meter cupboard and usage? Our customer service is happy to think along with you by phone, email or WhatsApp.


